1, high contrast, high resolution, network quality, one scan output for graphics. 2, the maximum density, sensitivity moderate speed. 3, the exposure and rinse tolerance to adapt to the high temperature rapid rinse process. 4, using a special polyester film base, dimensional stability, good flatness. 5 can be hand-copy films and reversal of yin and yang Films unsealed film lighting and security should be in black or security lighting conditions unsealed. Safety lamp for the wavelength 500 ~ 520nm, dark green, unsealed as soon as possible after the film runs out, the film should not run out of original packaging for safekeeping. Should be used with caution, to prevent friction, folding, grease and fingerprints and other damage to the film. Exposure of the laser imagesetter film exposure; due to the aging of the laser tube with the model and status of different exposure conditions need to be tested to determine. Washing process recommended conditions listed in the table imaging. Developer temperature 30 ~ 32 ℃ * 34 ~ 35 ℃ 60 ~ 50 seconds imaging time 50 to 40 seconds * to recommend the preferred imaging conditions user dry and cold storage preservation. Storage temperature should be lower than 20 ℃, relative humidity less than 65%. Reduce heat to save the life of the film. To avoid radioactive or other hazardous substances by the erosion, avoid direct sunlight. 18 months warranty